Tips for Choosing the Right Auto-Darkening Welding Helmet

helmet

 

In the welding works, welding helmets are the most important safety and welding supplies and protection equipment after welding gloves. If you buy the wrong kind, you will be stuck with it for at least 1 job, and that might be too long, getting it right the first time will make your welding experience more enjoyable from the start. Wilding professionals face many risks that could cause eye problems, such as infrared, high intensity light and ultraviolet. Those factors could bring permanent retinal damage. That is why you as a welder need a welding helmet to protect your eyes.

Here are 4 tips listed that will help you out when picking up a Darkening Welding Helmet.

Choosing the Right Welding Helmet

These tips will steer you in the right direction when picking out your first welding helmet, and will prevent you from making any rookie mistake and buying one that will not do the job properly. If you buy the wrong kind, you will be stuck with it for at least 1 job, and that might be too long, getting it right the first time will make your welding experience more enjoyable from the start.

Sensitivity setting on the helmet

You need to make sure that it has a Sensitivity setting on the helmet, so that it will not get too dark when dimming, and prevent you from seeing altogether. It needs to be just right for all working conditions from indoor with no – poor lighting, to outdoor work where you have the sun as your light source and miller welding helmet is a good choice. See more Here.

Adjusting shade strength

Shade Strength will determine how bright the torch can be before it starts to hurt your eyes. Some helmets, even though they are auto adjusting, can come with fixed shade strength, and you might find that it is not good enough for the job you are doing. In turn, this will make you go out and buy another one that has this feature in it.

Make sure that it can be auto adjusted anywhere from 9 – 14, this will cover all possible brightness’s you might encounter.

Darkening spend

You must have a very fast darken speed at least 1/20,000 and up. Not too fast, and not to slow, if it is too fast, you won’t be able to see before the torch lights up, to slow, and you will hurt your eyes as the torch does its initial flare up. This could be quite painful if it ends up happening.

Miller welding helmet are cheap

The price of the welding helmet should be higher than normal, go for the higher $200 – $300 range if they have any. This is making sure that it is good quality, and will last you awhile; along with having most if not all the features you will ever need for any type of job imaginable.

If you go for a cheap even $80 helmet, you might be either stuck with pretty much no features, and a fixed shade strength, which becomes pretty useless in most jobs, as they are usually fixed at 10, which is meant for the hobbyist, and even then is usually not strong enough to be welding for any extended period of time

As you can see those are some solid tips on picking out a Darkening Welding Helmet, especially if it is for the first time. Remember, getting the wrong sensitivity levels might prevent you from seeing altogether, along with damaging your eyes with a poor shade rating. For Safety: http://www.yourlegalassist.com/, and If your welding helmet does not darken quickly enough, you might blind yourself, and prevent you from continuing your work.

 

 

Leave a Comment

Your email address will not be published. Required fields are marked *